MiniKap® microfiltration modules are excellent for point-of-use applications such as laboratory water and gas filtration for air or nitrogen blow-of guns. MiniKap® filters contain DynaFibre® membrane for greater surface areas in less space, higher flow rates, and reduced hold-up volumes. The small size makes it easy to use in laboratory applications. Multiple end fitting configurations are available so that the MiniKap® filter can easily fitted to most air or water systems.

MiniKap® filters are 0.2 µm rated and are naturally hydrophilic. The water filters (MK2M 210 V6S and MK2M 21B V6S) also has an hydrophobic vent which allows water to flow freely without trapping air in the housing (eliminating the need to manually vent the housing).

• Membrane material................... Mixed cellulose ester membranes
• Housing material.................................................... Polycarbonate
• Potting material........................................................ Polyurethane
• Max. operating pressure.......................................50 psi (3.4 bar)
• Max. continuous operating temp..........................82o C (180o F)
• Typical Pure Water filtration rate at 10 psi
  • 1.4 L/min for 225 cm2
  • 2.0 L/min for 500cm2
• Typical Air Filtration Rates at 10 psi
  • 65 L/min for 225 cm2
  • 90 L/min for 500 cm2

• Point-of-use water filtration, gas filtration and fluid sterilization